Before Use; Mounting The O2 Sensor - Siare Falco 202 Evo User Manual

3.1

Before use

3.1.1 Mounting the O

Thoroughly unpack the O

Insert and screw the cell in the space
bearing the label "O

Connect the pin to the O

Make sure that the RJ connector is correctly
inserted in the lung ventilator's dedicated
socket [ connector FiO
3-2
sensor
2
WARNING !! User injury hazard
To avoid electric shock risk and/or components parts breakage during
interventions, please make sure that the lung ventilator's power supply is
cut off.
cell.
2
SENSOR".
2
sensor.
2
].
2
WARNING !! Patient injury hazard
When the lung ventilator is on, the system carries out a series of checks,
such as including the O2 sensor connection ("SELF TEST" phase see cap.
3.5).
User manual, DU3104101