Controller Node Leds And Ports - HPE 3PAR StoreServ 9000 Customer Self Install Manual

Controller node LEDs and ports

Figure 49: Controller node LEDs and ports, controller node enclosure rear view
1. Fault LED
2. Status LED
3. UID/Service LED
4. 10 GbE SFP port (RCIP) - optical SFP/connector
5. Link activity LED
6. Speed LED
7. 1 GbE MGMT port (management) - standard CAT-5/RJ-45 connector
8. Link activity LED - Activity/Link
9. Speed LED - Speed
10. Service port (console)
Table 14: Controller node LEDs and ports, controller node enclosure rear view
Callout
1
Controller node:
Fault LED
2
Controller node:
Status LED
3
Controller node:
UID/Service LED
76 More information
LED Status State
Green solid Booting; not a cluster member
Green flashing (1 Normal operation
blink/sec)
Amber solid Fault with the controller node or component
Blue solid Locate active and/or shutdown (halted); not a cluster
member; safe to remove
Blue flashing Locate active; do not remove component
Table Continued