Power Supply Unit Information, Drive Enclosure; Power Distribution Unit Information - HPE 3PAR StoreServ 9000 Customer Self Install Manual

Figure 34: Power supply unit numbering, controller node enclosure rear view

Power supply unit information, drive enclosure

Figure 35: Power supply unit numbering, drive enclosure rear view

Power distribution unit information

For a storage system that is factory integrated in an HPE rack, the power distribution units (PDUs) are
factory installed with circuit breakers and all cabling is accessible from the rack rear.
WARNING: Do not connect unsupported components to the PDUs.
The PDUs can be single phase or three phase and are regionally specific.
• With the storage system installed in a 42U 1,075 mm HPE rack, horizontal-modular PDUs are used
and up to 12 drive enclosures are supported in the base rack.
• With the storage system installed in a 42U 1,200 mm HPE rack, vertical PDUs are used and up to 16
drive enclosures are supported in the base rack.
Alternatively, an HPE 3PAR StoreServ Third Party Rack Mount Kit can be purchased for installation of the
storage system in a supported rack other than an HPE rack.
More information 63