Omron G5 Series User Manual page 495

Pn
Name
No.
528 Default Display
531 Reserved
532 Command
Pulse Input
Maximum
Setting
533 Pulse
Regeneration
Output Limit
Setting
535 Front Key
Protection
Setting
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
Setting Description
29 Drive serial number
30 Motor serial number
31 Accumulative operation time
32 Automatic motor recognition function
33 Temperature information
35 Reserved (Do not set.)
Do not set.
Set the maximum command pulse input value.
Set whether to enable or disable the pulse
regeneration limit error detection function.
0 Disabled
1 Enabled
Set whether or not to restrict operations on the
front panel.
0 Operations not restricted
1 Operations restricted
Appendices
Default Setting
Unit
setting range
1 – 0 to 35
–
h
–
°C
–
1 – 1
4,000 kpps 250 to
4,000
0 – 0 to 1
0 – 0 to 1
Cycle the
power
supply
Required
–
Required
A
Required
Required
A - 29