Omron G5 Series User Manual page 419

Reserved
Do not set.
Jog Operation
Trial operation can be performed with no-load, i.e., without connecting the control I/O connector (CN1) to
the Servomotor.
1
Preparations for jog operation
Key
Display example
operation
fkn
2
Perform jog operation.
Key
Display example
operation
3
Return to the auxiliary function mode display.
Key
Display example
operation
fkn
OMNUC G5-series (Pulse-train Input Type) AC Servomotors and Servo Drives User's Manual
fkn fkn
From the auxiliary function mode alarm clear display, press the
switch to the jog operation mode display.
Press
Press and hold
The number of dashes on the display increases.
The jog operation is ready.
If
Press and hold
The decimal point moves leftward.
The servo is turned ON.
Pressing the
direction; pressing the
reverse direction. The Servomotor stops rotating when you release the key.
At this time, the rotation speed set in Jog Speed (Pn604) will be used.
If
Press
The servo is unlocked and in a servo-free state.
fkn
Description
key to switch to the jog operation mode display.
key for 5 seconds or more (until
is displayed, the servo is not ready.
key for 5 seconds or more (until
Description
key enables the Servomotor to rotate in the forward
key enables the Servomotor to rotate in the
is displayed, the servo is not ready.
Description
key to return to the auxiliary function mode display.
8 Operation
key to
appears).
appears).
8
8 - 23