Using PIM with Other Features
PIM with ACLs or VMAPs
PIM with IGMP
506
G8264CS Application Guide for ENOS 8.4
If using ACLs or VMAPs, be sure to permit traffic for local hosts and routers.
If using IGMP (see Chapter
IGMP static joins can be configured with a PIM‐SM or PIM‐DM multicast group
IPv4 address. Using the ISCLI:
RS 8264CS(config)# ip mroute <multicast group IPv4 address> <VLAN> <port>
IGMP Querier is disabled by default. If IGMP Querier is needed with PIM, be
sure to enable the IGMP Query feature globally, as well as on each VLAN where
it is needed.
If the switch is connected to multicast receivers and/or hosts, be sure to enable
IGMP snooping globally, as well as on each VLAN where PIM receivers are
attached.
26, "Internet Group Management Protocol"):