Snmpv2 Trap Host Configuration - Lenovo RackSwitch G8264CS Application Manual

SNMPv2 Trap Host Configuration

© Copyright Lenovo 2017
The SNMPv2 trap host configuration is similar to the SNMPv1 trap host
configuration. Wherever you specify the model, use snmpv2 instead of snmpv1.
RS 8264CS(config)# snmp-server user 10 name v2trap
RS 8264CS(config)# snmp-server group 10 security snmpv2
RS 8264CS(config)# snmp-server group 10 user-name v2trap
RS 8264CS(config)# snmp-server group 10 group-name v2trap
RS 8264CS(config)# snmp-server access 10 name v2trap
RS 8264CS(config)# snmp-server access 10 security snmpv2
RS 8264CS(config)# snmp-server access 10 notify-view iso
RS 8264CS(config)# snmp-server notify 10 name v2trap
RS 8264CS(config)# snmp-server notify 10 tag v2trap
RS 8264CS(config)# snmp-server target-address 10 name v2trap
address 100.10.2.1
RS 8264CS(config)# snmp-server target-address 10 taglist v2trap
RS 8264CS(config)# snmp-server target-address 10 parameters-name
v2param
RS 8264CS(config)# snmp-server target-parameters 10 name v2param
RS 8264CS(config)# snmp-server target-parameters 10 message snmpv2c
RS 8264CS(config)# snmp-server target-parameters 10 user-name v2trap
RS 8264CS(config)# snmp-server target-parameters 10 security snmpv2
RS 8264CS(config)# snmp-server community 10 index v2trap
RS 8264CS(config)# snmp-server community 10 user-name v2trap
Note: ENOS 8.4 supports only IPv4 addresses for SNMPv1 and SNMPv2 trap
hosts.
Chapter 35: Simple Network Management Protocol
553