Summary Of Acl Actions - Lenovo RackSwitch G8264CS Application Manual

Hide thumbs Also See for RackSwitch G8264CS:

Table of Contents

Summary of ACL Actions

TCP/UDP header options (for all ACLs)

TCP/UDP application source port and mask as shown in Table 12

TCP/UDP application destination port as shown in Table 12

Table 12. Well‐Known Application Ports

TCP/UDP flag value as shown in Table 13

Table 13. Well Known TCP Flag Values

Packet format (for IPv4 ACLs and VMaps only)

Ethernet format (eth2, SNAP, LLC)

Ethernet tagging format

IP format (IPv4, IPv6)

Egress port packets (for all ACLs)

Once classified using ACLs, the identified packet flows can be processed

differently. For each ACL, an action can be assigned. The action determines how the

switch treats packets that match the classifiers assigned to the ACL. G8264CS ACL

actions include the following:

Pass or Drop the packet

Re‐mark the packet with a new DiffServ Code Point (DSCP)

Re‐mark the 802.1p field

Set the COS queue

Chapter 7: Access Control Lists