Lenovo RackSwitch G8264CS Application Manual page 156

4. Examine the aggregation information on each switch.
156
G8264CS Application Guide for ENOS 8.4
# show portchannel information
PortChannel 3: Enabled
port state:
2: STG 1 forwarding
9: STG 1 forwarding
16: STG 1 forwarding
Information about each port in each configured LAG is displayed. Make sure that
LAGs consist of the expected ports and that each port is in the expected state.
The following restrictions apply:
 Any physical switch port can belong to only one LAG.
 Up to 16 ports can belong to the same LAG.
 All ports in static LAGs must be have the same link configuration (speed, duplex,
flow control).
 Aggregation with third‐party devices must comply with Cisco
technology.
® ®
EtherChannel