© Copyright Lenovo 2017
To view detailed information for a remote device, specify the Index number as
found in the summary. For example, in keeping with the sample summary, to list
details for the first remote device (with an Index value of 1), use the following
command:
RS 8264CS(config)# show lldp remote-device 1
Local Port Alias: 3
Remote Device Index
Remote Device TTL
Remote Device RxChanges : false
Chassis Type
Chassis Id
Port Type
Port Id
Port Description
System Name
System Description: Lenovo RackSwitch G8264CS, Lenovo
Networking OS: version 8.4, Boot Image: version 8.4
System Capabilities Supported : bridge, router
System Capabilities Enabled
Remote Management Address:
Subtype
Address
Interface Subtype
Interface Number
Object Identifier
Note: Received LLDP information can change very quickly. When using show
commands, it is possible that flags for some expected events may be too short‐lived
to be observed in the output.
: 1
: 99
: Mac Address
: 00-18-b1-33-1d-00
: Locally Assigned
: 23
: 7
:
: bridge, router
: IPv4
: 10.100.120.181
: ifIndex
: 128
:
Chapter 34: Link Layer Discovery Protocol
545