Acl Example 6 - Lenovo RackSwitch G8264CS Application Manual

ACL Example 6
1. Configure an Access Control List.
2. Add ACL 4 to port 1.
© Copyright Lenovo 2017
This configuration blocks traffic from a network that is destined for a specific
egress port. All traffic that ingresses port 1 from the network 100.10.1.0/24 and is
destined for port 3 is denied.
RS 8264CS(config)# access-control list 4 ipv4 source-ip-address
100.10.1.0 255.255.255.0
RS 8264CS(config)# access-control list 4 egress-port 3
RS 8264CS(config)# access-control list 4 action deny
RS 8264CS(config)# interface port 1
RS 8264CS(config-if)# access-control list 4
RS 8264CS(config-if)# exit
Chapter 7: Access Control Lists
127