Lenovo RackSwitch G8264CS Application Manual page 171

Hide thumbs Also See for RackSwitch G8264CS:
Table of Contents

Advertisement

© Copyright Lenovo 2017
Figure 12. Spanning Tree Restoring the Switch‐to‐Switch Link 
Enterprise
Routing
Switches
Switch 1
Server
Server
In this example, port 10 on each G8264CS is used for the switch‐to‐switch link. To 
ensure that the G8264CS switch‐to‐switch link is blocked during normal operation, 
the port path cost is set to a higher value than other paths in the network. To 
configure the port path cost on the switch‐to‐switch links in this example, use the 
following commands on each G8264CS.    
RS 8264CS(config)# interface port 10
RS 8264CS(config-if)# spanning-tree stp 1 path-cost 60000
RS 8264CS(config-if)# exit
STP
Restores Link
Server
Chapter 10: Spanning Tree Protocols
Uplink
Failure
Switch 2
Server
171

Advertisement

Table of Contents
loading

Table of Contents