Defining Server Ports; Enabling The Vnic Feature - Lenovo RackSwitch G8264CS Application Manual

Defining Server Ports

Enabling the vNIC Feature

236
G8264CS Application Guide for ENOS 8.4
vNICs are supported only on ports connected to servers. Before you configure
vNICs on a port, the port must first be defined as a server port using the following
command:
RS 8264CS(config)# system server-ports port <port alias or number>
Ports that are not defined as server ports are considered uplink ports and do not
support vNICs.
The vNIC feature can be globally enabled using the following command:
RS 8264CS(config)# vnic enable