Festo CPX-CM-HPP Electronic Manual page 95

A. Technical appendix
Trace data
NB−FN−Pos−Day−h−m−s−ms
? 0 107 1 000:0:2:57:13
_____________________________________________________
Back ßà Detail
Trace data number 0
In fault Ch 1
System error A
Module position 1
CM−HPP: FHPP−Gateway
Days: 0
Hours: 0
Minutes: 2
Seconds: 57
Milliseconds: 13
_____________________________________________________
Back ßà
Festo P.BE−CPX−CM−HPP−E N en 0910NH
The error memory is displayed in the [Trace Data] menu.
_
Number of the entry (NB)
Number of the CPX error group (FN)
Module position (Pos)
Time stamp in the format Days:Hours:Minutes:
Seconds:Milliseconds (Day−h−m−s−ms) since the
CPX terminal was switched on
The [Detail] menu displays the following additional
information on the current error.
Channel number
Designation of the CPX error group
Module position
Module designation
Time stamp in the format Days:Hours:Minutes: Seconds:
Milliseconds (Days:Hours:Minutes:Seconds: Milliseconds)
since switch−on
Note
Additional information on the Handheld CPX−MMI can be
found in the documentation P.BE−CPX−MMI−1−...
A−11