General Installation Instructions - Festo CPX-CM-HPP Electronic Manual

2. Fitting and installation
2.1

General installation instructions

Festo P.BE−CPX−CM−HPP−EN en 0910NH
Warning
Before carrying out installation and maintenance work,
switch off the following:
if applicable, the compressed air supply
the operating voltage supply for the electronics/sensors
the load voltage supply for the outputs/valves
In this way, you can avoid:
uncontrolled movements of loose tubing lines
uncontrolled movements of the connected actuators
undefined switching states of the electronics
Caution
The CPX−CM−HPP contains electrostatically sensitive
devices.
Therefore, do not touch any components.
·
Observe the handling specifications for electrostatically
·
sensitive devices.
They will help you avoid damage to the electronics.
Information about mounting the CPX terminal can be found in
the CPX system description (P.BE−CPX−SYS−...).
Information on mounting the components of the positioning
system can be found in the related components
documentation.
2−3