Festo CPX-CM-HPP Electronic Manual page 47

3. Commissioning
st nd
1 position 2
4 E (=error)
st nd
1 position 2
1 E (=error)
u (=warning)
1 4
Festo P.BE−CPX−CM−HPP−EN en 0910NH
Errors during initialization
In case of errors, initialization stops with the defective axis.
The error numbers are permanently displayed, e.g.
rd
position 3 position
1
Initialization is continued only after the error is eliminated.
An overview of the error numbers can be found in chap. 4.2.3.
Errors after initialization
Errors that occur during operation are depicted with a
changing display. First the error type is displayed
(error or warning), then the error number. The display
duration is in each case approx. 0.5 s. The following example
depicts the display for error 44 at axis 1:
nd
position 3 position
4
An overview of the error numbers can be found in chap. 4.2.3.
Significance
Axis 4 shows error 1
Significance
Axis 1 shows error type error" or warning"
Axis 1 shows error 44
3−11