Festo CPX-CM-HPP Electronic Manual page 90

A. Technical appendix
1: CM−HPP
X−Axis: MTR−DCI
Y−Axis: CMMS−AS
Z−Axis: No axis
U−Axis: No axis
_____________________________________________________
Back OK
1: CM−HPP :M.X
Process state
_____________________________________________________
I: Enabled
I: Open
I: Warn
I: Fault
I: 24VL
I: Lock
I: OPM1
I: OPM2
I: /Halt
I: MC
I: Ref
O: Enable
O: /Stop
O: /Brake
O: Reset
O: Lock
O: OPM1
O: OPM 2
O: /Halt
_____________________________________________________
Back Force Mode
A−6
In the [Monitoring/Forcing (M)] menu, the current values of
some inputs and outputs of the connected motor controllers
are displayed. With the Force Mode" function, statuses of the
inputs and outputs can be forced.
The following I/O data are displayed for each axis:
Entry in the CPX−MMI
I: Enabled
I: Open
I: Warn
I: Fault
I: 24VL
I: Lock
I: OPM1
I: OPM2
O: Enable
O: /Stop
O: /Brake
O: Reset
O: Lock
O: OPM1
O: OPM2
O: /Halt
FHPP bit
SCON.B0
SCON.B1
SCON.B2
SCON.B3
SCON.B4
SCON.B5
SCON.B6
SCON.B7
CCON.B0
CCON.B1
CCON.B2
CCON.B3
CCON.B5
CCON.B6
CCON.B7
CPOS.B0
Festo P.BE−CPX−CM−HPP−E N en 0910NH