A.3 Device−Specific Information On The Cpx−Mmi Handheld - Festo CPX-CM-HPP Electronic Manual

A. Technical appendix
A.3 Device−specific information on the CPX−MMI handheld
System Overview
CPX terminal
0: FEC Controller
1: CM−HPP FHPP−Gateway
2: 8DI/8DO Multi I/O
_____________________________________________________
Diag ßà
1: CM−HPP _
Monitoring/Forcing (M)
Diagnostics (D)
Parameters (P)
Module Data (MD)
___________________________________ _____________________
Back
Festo P.BE−CPX−CM−HPP−E N en 0910NH
Some information of the CPX−CM−HPP is represented on the
CPX−MMI. This information is explained subsequently by
means of some examples.
The CPX−CM−HPP is displayed as CM−HPP FHPP−Gateway"
_
module on the MMI. The complete name is displayed with the
key <−−>".
The module−related menu options and functions are explained
subsequently. Further below, you will find information about
OK
the system diagnosis that you can call up under [Diag].
The CPX−CM−HPP supports the following functions:
Monitoring/Forcing (M)
Diagnostics (D)
OK
Parameters (P)
Module Data (MD)
Warning
Incorrect entries in the Force Mode, [Monitoring/Forcing (M)]
menu can cause accidental movements and severe personal
injury and material damage!
A−5