Table of Contents
Advertisement
®
R&S
NGE100B
Figure 5-22: WLAN connected
6. To disconnect, select "Disconnect" in the WLAN dialog.
5.6.2 USB Connection
Alternatively, connect a USB cable to the USB port (see
the USB port and PC for a USB connection. The R&S NGE100B supports USB TMC
and USB VCP connection.
For more information, see
1. Select "Interface > USB" menu item.
The R&S NGE100B displays the "USB" dialog. See
Figure 5-23: USB dialog
2. Set the desired "USB Mode".
3. Press Enter key to confirm the settings.
The R&S NGE100B displays message to prompt the user to restart the instrument
to apply the changes.
4. Restart the R&S NGE100B to apply changes.
User Manual 5601.1343.02 ─ 04
Chapter 6.1.1,
"USB",
Instrument Functions
Connecting to a Network
Figure 4-4
for the location of
on page 60.
Figure
5-23.
53
Advertisement
Table of Contents
