Usb Connection - R&S NGE-K101 User Manual

www.allice.de
®
R&S NGE100B

5.6.2 USB Connection

User Manual 5601.1343.02 ─ 02
Figure 5-21: WLAN dialog
2. Select "Enabled" for "Module".
3. Set the "SSID"
SSID - Service Set Identifier, an unique ID used for naming wireless network.
4. Set the associated password for the "SSID".
5. Select the "Connect" button.
If connection is successful, the "Status" shows "Connected". See
When the connection is alive, the WLAN icon turns green on the status bar. See
Figure 5-1.
Figure 5-22: WLAN connected
6. To disconnect, select "Disconnect" in the WLAN dialog.
Alternatively, connect a USB cable to the USB port (see
the USB port and PC for a USB connection. The R&S NGE100B supports USB TMC
and USB VCP connection.
For more information, see
1. Select "Interface > USB" menu item.
The R&S NGE100B displays the "USB" dialog. See
Chapter 6.1.1, "USB", on page 59.
Allice Messtechnik GmbH
Instrument Functions
Connecting to a Network
Figure
Figure 4-4 for the location of
Figure 5-23.
5-22.
51