Abbott CELL-DYN 3200 System Operator's Manual page 612

Reticulocyte Package
Retic Menu Options
Retic Run Menu
Retic Data Log Menu
PREVIOUS
SPECIMEN SPECIMEN
14-24
Procedure: Units Selection
1. From the RETIC SET UP menu, press the [UNITS SELECTION] key.
2. Choose one of the following two options:
• To select a predefined set of units, press the appropriate soft key. The
group of selected units is highlighted on the screen. If using this option,
skip to step 6.
• For individual unit selection, use the arrow keys on the keyboard to move
the cursor to the desired units.
3. Press the [SELECT UNITS] key to enter the selection. The chosen selection is
highlighted on the display.
4. Use the arrow keys on the keyboard to move the cursor to the next unit to be
selected.
5. Repeat steps 3 and 4 until all selections have been made.
6. If desired, press the Print Screen key on the keyboard to obtain a printout of
the selected units.
7. Press the [RETURN] key to return to the RETIC SET UP menu.
For a description of the RETIC RUN menu and the submenus that are accessed from
it, refer to Routine Operation, Retic Run Menu within this chapter.
RETIC MAIN
RETIC DATA LOG
EDIT FIND
ID SPECIMEN
RETIC DISPLAY SPECIMEN
NEXT EDIT
SPECIMEN
TRANSMIT
RETIC DATA LOG SEARCH
PRINT
TRANSMIT
SPECIMEN REPORT
PRINT RETIC
MAIN
DATA DATA LOG
RETURN
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Section 14