Abbott CELL-DYN 3200 System Operator's Manual page 155

Section 5
Main Menu Screen
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Data Module Program Overview
The Data Module menus are presented as key labels displayed across the bottom of
the screen. Each menu is accessed by pressing the soft key located directly below
the label. From left to right, these soft keys correspond to keys F1–F8 on the
standard computer keyboard.
When the system is powered ON, the MAIN MENU screen, depicted in Figure 5.1, is
displayed. The key labels displayed across the bottom of this screen are used to
access all of the sub-menus that are available. The main menu keys are listed
below.
MAIN MENU keys:
SET UP
RUN
DATA LOG
RETIC DATA LOG
QUALITY CONTROL
CALIBRATION
DIAGNOSTICS
SPECIAL PROTOCOLS
NOTE: Reticulocyte menu operating instructions are detailed in Section 14:
Reticulocyte Package.
The MAIN MENU screen is divided into four sections. The upper left-hand corner
shows the current version of the Data Module software. The upper right hand
corner shows the current date and time, operator ID and the sequence number. The
information in the upper right corner is displayed on every screen during operation.
Operating Instructions
5-3