Abbott CELL-DYN 3200 System Operator's Manual page 567

Section 13
Specifications
Dimensions and Weight
Tube Types
Rack and Tube Capacity
Minimum Sample Volume
Maximum Sample Volume
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Physical and Performance Specifications
Refer to Section 4: Performance Characteristics and Specifications for complete
performance specifications for the CELL-DYN 3200SL. The following
information on the Sample Loader is included here for convenience.
Height 6 in (15.2 cm)
Width 32.5 in (82.5 cm)
Depth 6.4 in (16.2 cm)
Weight 18 lbs (8.1 kg)
The Closed Sample Tower Module and the Sample Loader are able to
accommodate the following tube types:
1. Beckton-Dickinson Type
• B-D Hemogard
• B-D Rubber Stopper (5.0 mL)
• Greiner (4.0 mL)
• Terumo Venoject ® II (5.0 mL)
®
2. Sarstedt Type
• Sarstedt EDTA (2.7 mL)
• Sarstedt Neutral (2.7 mL)
NOTE: All other tube types must be processed in the Open mode.
5 racks on the load side
5 racks on the unload side
50 tubes (10 tubes per rack)
The minimum blood volume per sample tube is 1.5 mL in the Closed Mode.
The maximum blood volume per sample tube is 3.0 mL in the Closed Mode.
®
Stopper (5.0 mL)
Sample Loader
13-3