Abbott CELL-DYN 3200 System Operator's Manual page 53

Section 1
Analyzer
Flow Panel
Electrical Power Supply
Pneumatic Power Supply
Laser Optics Assembly
Syringe Drive Assemblies
Open Sample Probe Assembly
Reagent/Waste System
Closed Sample Tower Assembly
Sample Loader (SL model only)
Figure 1.3 CELL-DYN 3200 System Components
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
The CELL-DYN 3200 consists of three major modules, the Analyzer, Data
Module, and the Display Station. The Analyzer and Data Module are housed in
single chassis. The Display Station is a standalone module. Figure 1.3 lists the
major subassemblies in each of the modules.
The Analyzer contains the hardware to aspirate, dilute, and analyze each whole
blood specimen.
The Data Module contains the components for analyzing, storing, and reporting
specimen results.
The Display Station module consists of a 15" color monitor and pressure-sensitive
keypad for selecting the displayed commands that operate the system.
The Sample Loader attaches to the front of the CELL-DYN 3200SL Analyzer and
is an integral part of the SL model. The Sample Loader is discussed throughout this
manual where appropriate. It is also discussed in detail in Section 13: Sample
Loader.
CELL-DYN 3200 System
Data Module
486 Computer
Floppy Disk Drive
Hard Disk Drive
PC Keyboard
Serial/Parallel Interface Ports
Printed Circuit Boards
Use or Function
System Components
Display Station
15" Color Monitor
Membrane Keypad
1-5