Abbott CELL-DYN 3200 System Operator's Manual page 284

Operating Instructions
Using The Data Log
Customize Data Log
5-132
The [CUSTOMIZE DATA LOG] key is used to customize the Data Log display. The
CUSTOMIZE DISPLAY FOR DATA LOG screen (see Figure 5.49) and the following
soft key labels are displayed when the [CUSTOMIZE DATA LOG] key is pressed:
SELECT PARAMETER/
PLACE PARAMETER
STANDARD GROUPS/
CUSTOM PLACEMENT
CUSTOMIZE PRINTOUT
RETURN
Figure 5.49 Customize Display for Data Log Screen Showing Standard Groups
The CUSTOMIZE DISPLAY FOR DATA LOG screen displays a matrix showing the four
parameter groups and a list of the available parameters. Parameter Group 1 is
displayed (in the order indicated from left to right) on the second DATA LOG screen.
The remaining groups are displayed on subsequent screens that are accessed by
pressing the Right Arrow key on the keyboard. The Left Arrow key is used to page
back through the screens to the first screen. Figure 5.50 shows a customized Data
Log display screen.
(The key alternates between the selections.)
(The key alternates between the selections.)
CELL-DYN
Section 5
® 3200 System Operator's Manual
9140181H—October 2001