Abbott CELL-DYN 3200 System Operator's Manual page 441

Section 10
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Figure 10.6 WOC Count Rate Data
Each key displays kinetic data for the selected parameter from the last cycle run.
When each key is pressed, the count rate data is displayed (see Figure 10.6) and the
key label changes to [CNT GRAPH] for that parameter.
Count rate data from the last cycle is displayed in a tabular format. The total count,
time segments and rate per second are displayed for multiple data points from that
cycle. (See Figure 10.6.) When the [CNT GRAPH] key for a particular parameter is
pressed, the rate-per-second data is displayed as a graph. (See Figure 10.7.) The
kinetic data and graph are useful when troubleshooting problems related to these
parameters.
Troubleshooting and Diagnostics
10-7