Abbott CELL-DYN 3200 System Operator's Manual page 289

Section 5
Data Log Codes
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Figure 5.52 Print Data Log Screen
The Data Log Codes are displayed in the Data Log in the column immediately
preceding the date (see Figure 5.52). These codes are displayed in the following
order:
O — Sample was run in the Open Mode
C — Sample was run in the Closed Mode
N — Incomplete aspiration in the Open Mode
I — Incomplete aspiration in the Closed Mode
K — Flow Error
R — Resistant RBC key was used to run this sample
F — Fragile WBC key was used to run this sample
NOTE: For Background and Latex specimens, only the O and C codes are used.
Operating Instructions
5-137