Abbott CELL-DYN 3200 System Operator's Manual page 587

Section 13
Installation
Running Samples
Maintenance
Troubleshooting
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
For detailed instructions on how to install the SL model, refer to Section 2:
Installation Procedures and Special Requirements.
Instructions for Routine Operation of the CELL-DYN 3200SL model are given in
Section 5: Operating Instructions.
Maintenance procedures on the SL model should be performed as directed in
Section 9: Service and Maintenance. These procedures consist of cleaning the
Tower Cover, the Needle, the Tube Grippers, the tray and the tube racks. If the
Vent/Aspiration Needle requires replacement, refer to Section 9: Service and
Maintenance; Subsection: Closed Sample Needle Replacement.
If a Sample Loader fault, error or other problem is detected, an alert message is
displayed on the bulletin line of the screen. For a list of messages, descriptions of
possible problems and recommended actions, refer to Section 10:
Troubleshooting and Diagnostics.
Routine Operating Procedures
Sample Loader
13-23