Abbott CELL-DYN 3200 System Operator's Manual page 600

Reticulocyte Package
Retic Menu Options
Retic Main Menu
14-12
SYSTEM 2.0
RETIC RETIC
SET UP RUN DATA LOG
Figure 14.3 Reticulocyte Main Menu Screen
The upper left-hand corner of the RETIC MAIN menu screen shows the current
revision of the instrument software. The upper right-hand corner shows the current
date and time, the current operator ID, and the Reticulocyte Sequence Number. The
information in the upper right-hand corner is displayed on every screen during
operation of the Reticulocyte Package.
The Status Box is displayed in the top center of the screen. This box appears on
every screen to show the following information:
• Menu in use (such as RETIC MAIN)
• Analyzer status (such as Ready)
• Other applicable information (such as report or file identity and any existing
fault conditions)
The cursor is positioned at the <OPERATOR ID> field when the RETIC MAIN menu
screen is displayed. An operator ID of up to three alphanumeric characters can be
entered. Press the Enter key on the keyboard to accept this operator ID. This
operator ID will be displayed on all other Reticulocyte Package screens and printed
on all reports.
CD3200 RETIC MAIN MENU
Ready
RETIC DATA LOG RETIC
QC
Section 14
18:27
Feb 23 2001
ACS
Operator ID
R-1
Retic Seq#
RETIC RETIC SP
DIAGNOSTIC PROTOCOLS
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001