Abbott CELL-DYN 3200 System Operator's Manual page 262

Operating Instructions
Using The Work List
Work List Soft Keys
5-110
8. COLLECTION DATE AND TIME
The date and time the specimen was collected may be entered in this field.
Date is entered as mm/dd for month and day only with no year. Time is
entered as hh/mm where hh represents the hour (from 00 to 23) and mm
represents the minute (from 00 to 59).
9. DR NAME
The name of the patient's doctor may be entered in this field. Up to 22
characters may be entered.
10. LIMIT SET
This field is used to enter the number of the Patient Limit Set that will be used
for flagging the sample. If no entry is made, the default (pre-selected) Patient
Limit Set is used.
11. PARAMETER SET
This field is used to enter the number of the Parameter Set that will be used
for the sample. If no entry is made, the default (pre-selected) Parameter Set
is used.
The function of each of the soft keys displayed on the WORK LIST screen is
discussed below.
Insert/Delete
When the [INSERT/DELETE] key is pressed, the following soft key labels are
displayed:
INSERT
DELETE
RETURN
Insert
The [INSERT] key is used to insert a line of information into the Work List. The line
is inserted at the cursor position and the remainder of the Work List is moved down
one line.
Delete
The [DELETE] key is used to delete a line of information from the Work List. When
the [DELETE] key is pressed, the following soft key labels are displayed:
CONFIRM DELETION
CANCEL DELETION
These keys are used to [CONFIRM] or [CANCEL] the Delete command.
The line is deleted at the cursor position and the remainder of the Work List is
moved up one line.
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Section 5