Abbott CELL-DYN 3200 System Operator's Manual page 285

Section 5
CELL-DYN ® 3200 System Operator's Manual
9140181H—October 2001
Figure 5.50 Customize Display for Data Log Screen Showing Group 1 Customized
Select Parameter
The [SELECT PARAMETER] key is used to select a parameter designated by the
cursor. When the key is pressed, the selected parameter is highlighted, the label
changes to [PLACE PARAMETER], and a [CANCEL SELECTION] key is displayed.
Place Parameter
The [PLACE PARAMETER] key is used to display the parameter in the location
indicated by the position of the cursor.
Cancel Selection
The [CANCEL SELECTION] key is used to cancel the selection and display the
[SELECT PARAMETER] key.
Operating Instructions
5-133