Com1 And Com2 Connector; Usb And Usb1 Connector - Honeywell Thor VM2 User Manual

COM1 and COM2 Connector

PIN 1 PIN 5
PIN 6 PIN 9
VMXD Enhanced Dock only: Because the power supply connector port for the VMXD
Enhanced Dock contains COM1 RTS and CTS signals, the COM1 port on the dock
should not be used when the power cable is used for screen blanking to avoid port con-
flicts.

USB and USB1 Connector

The Standard Dock has a USB connector. The Enhanced Dock has a USB1 connector.
PIN 5 PIN 1
PIN 9 PIN 6
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Pin Signal Description
1 DCD Data Carrier Detect – Input
2 RXD Receive Data – Input
3 TXD Transmit Data – Output
4 DTR Data Terminal Ready – Output
5 GND Signal/Power Ground
6 DSR Data Set Ready – Input
7 RTS Request to Send – Output
8 CTS Clear to Send – Input
9 +5VDC Bar Code Scanner Power - 500mA max
or or
RI Ring Indicator - Input
Shell CGND Chassis Ground
Pin Signal Description
1 GND Common ground
2 USBC_D+ USB client data signal
3 USBC_D- USB client data signal
4 USB_H1_PWR USB host 1; 5V output power
5 GND Common ground
6 GND Common ground
7 USB_H1_D+ USB host 1 data signal
8 USB_H1_D- USB host 1 data signal
9 USBC_VBUS USB client 5V detect from attached host
359