Serial Connector (Com1 And Com2); Screen Blanking; Usb Connector(S) - Honeywell Thor VM3 User Manual

Serial Connector (COM1 and COM2)

COM1
COM2
USB
CANBUS/AUDIO
Smart Dock

Screen Blanking

The screen blanking signal can be provided either by a Honeywell Screen Blanking Box or a user supplied switch or
relay. See Screen Blanking

USB Connector(s)

COM1
COM2
USB
CANBUS/AUDIO
Smart Dock
Enhanced Smart Doc
(page 1-38) for information on connecting screen blanking accessories.
Enhanced Smart Doc
The COM1 and COM2 connectors are D-9 male connectors
located on the back of the Quick Mount Smart Dock.
Power the Thor VM3 off before attaching a cable to any port
(serial, USB, Audio/CAN, etc.).
The serial connectors are industry-standard RS-232, PC/AT
standard 9–pin "D" male connector. See
Connector (page 5-5) for connector pinout detail.
See Connect Serial Device
If a COM port is not being used for a scanner, it can be used
for Screen Blanking (page 1-38) when the vehicle is in
motion.
The USB or USB1 connector is a D-9 female connector
located on the back of the Quick Mount Smart Dock. See
USB Connector (page 5-6) for connector pinout detail.
The USB-2 connector is a D-15 female connector located on
the back of the Quick Mount Smart Dock. See
Connector (page 5-6) for connector pinout detail.
Power the Thor VM3 off before attaching a cable to any port
(serial, USB, Audio/CAN, etc.).
COM1 and COM2
(page 1-42) for more information.
USB
3 - 5