Honeywell Thor VM2 User Manual page 175

Note: Launch order is determined by the Order specified in the Application tab. The Order value
does not have to be sequential.
Auto At Boot
Default is Enabled.
Auto At Boot
When enabled, automatically launches (subject to the specified Delay in seconds) the
application after the unit is rebooted. If a Delay in seconds is specified, AppLock waits
for the specified period of time to expire before launching the application. The Delay
default value is 10 seconds; valid values are between 0 "no delay" and a maximum of
999 seconds.
Retries
This is the number of times the application launch will be retried if a failure occurs when
the application is automatically launched at bootup. Valid values are between 0 (no
tries) and 99 tries or -1 for infinite. Infinite tries ends when the application successfully
launches. The default is 0 retries.
Delay
This timer is the time that AppLock waits prior to the initial launch of the selected appli-
cation when it is automatically launched at bootup. Delay default is 10 seconds. Valid
values are between 0 seconds (no delay) and 999 seconds.
The Auto At Boot delay is associated for each application; it will be either a value speci-
fied by the Administrator or it will be the delay default value. At startup, when a delay
has been assigned for each application, AppLock waits for the delay associated with the
first application to expire before launching the first application then AppLock waits for
the delay associated with the second application to expire before launching the second
application. AppLock continues in this manner until all applications are launched.
Note: A "Global Delay" can be accomplished by setting a timed delay for the first application to
be launched (by lowest Order number) and no delay (0 seconds) for all other applications.
Note: Launch order is determined by the Order specified in the Application tab. The Order value
does not have to be sequential.
Auto Re-Launch
Auto Re-Launch
Default is Enabled.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 163