Preparing A Device For Remote Management - Honeywell Thor VM2 User Manual

To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the Enabler icon on the desktop.
2. Select File > Settings.
3. Select the Adapters tab.
4. Choose settings for the Use Manual Settings parameter.
5. Choose settings for Manage Network Settings, Manage Wireless Settings and Use
6. Click the OK button to save the changes.
7. Reboot the device.

Preparing a Device for Remote Management

Two additional utilities are necessary for remote management.
•
If in doubt, verify RMU.CE.CAB exists in the \System folder. If the RMU.CE.CAB file is
present when the Enabler is installed, the RMU is also installed.
Important: - If the OS package includes double-byte Asian fonts, the storage RAM prop-
erty of the RMU must be higher than the default value (40MB).
If the amount of storage RAM is too low, the Enabler returns a "Mobile unit out of
resources" error.
•
If the Remote Management Utility (RMU) is not present on the Thor VM2, see Using
Wavelink Avalanche to Upgrade System Baseline, below
Using Wavelink Avalanche to Upgrade System Baseline
This procedure assumes the Avalanche Enabler is already installed on the Thor VM2
and is already in communication with the Avalanche MC Console.
Part 1 – Bootstrapping the RMU
1. Install the RMUCEbt package into the Avalanche MC Console. Do NOT include the
2. Enable ONLY the RMUCEbt package in the Avalanche MC Console and update the
280
Avalanche Network Profile.
The Remote Management Utility (RMU) must be installed on all mobile devices first
– then you can control mobile device reboot, storage RAM adjustment, real-time
updates and Avalanche Enabler properties. If the RMU is not already installed on the
Thor VM2, see Using Wavelink Avalanche to Upgrade System Baseline, below.
Use the Wireless Configuration Application (WCA) when you want to remotely
manage the Summit client device. This utility is downloaded and installed in addition
to the Remote Management Utility. The WCA is included when the Summit radio
driver software is updated. The WCA is automatically installed when the radio driver
is updated.
Reboot option as part of the configuration (i.e. the Reboot button in the "Reboot
Options" branch must be unbolded).
devices. The RMU is downloaded and automatically installed.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide