System Memory; Video Subsystem; Audio Interface; Card Slots - Honeywell Thor VM2 User Manual

System Memory

Main system memory is 1GB SDRAM.

Video Subsystem

The Thor VM2 video subsystem consists of a color TFT display. The video subsystem
complies with the VESA VL bus standard. The resolution of this display is 1024x768 pix-
els. This resolution complies with the SVGA graphics industry standard.
The display supports screen blanking to eliminate driver distraction when the vehicle is
in motion.

Audio Interface

Speakers are located on the bottom front of the Thor VM2. A headset adapter cable pro-
vides a connection for headset operation. When a headset is plugged into the adapter
cable, the main speakers are disabled.
A microphone is located at the upper right of the Thor VM2 display, near the Thor VM2
emblem. When a headset is plugged into the adapter cable, the internal microphone is
disabled.

Card Slots

CompactFlash (CF) Slot
The CF ATA slot is not hot swappable. The Thor VM2 must be powered down to insert or
remove an ATA card. Since the operating system is stored on the CF ATA card, the Thor
VM2 cannot operate without the ATA card.
Secure Digital (SD) Slot
The SD slot accepts an SD memory card. The SD card is hot swappable.

Bluetooth EZPair

The Thor VM2 contains Bluetooth version 2.0 with Enhanced Data Rate (EDR) up to 3.0
Mbit/s over the air. Bluetooth device connection (or pairing) can occur at distances up
to 32.8 ft (10 meters) Line of Sight. The wireless client retains wireless connectivity
while Bluetooth is active.
The user cannot select PIN authentication or encryption on connections from the Thor
VM2. However, the Thor VM2 supports authentication requests from pairing devices. If
a pairing device requests authentication or encryption, the Thor VM2 displays a prompt
for the PIN or passcode. Maximum encryption is 128 bit. Encryption is based on the
length of the user's passcode.
26 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide