Honeywell Thor VM2 User Manual page 195

LED on Bluetooth Device
Green LED blinks once a second
Upon startup, if the scanner sounds a long tone, this means the scanner has not passed
its automatic Selftest and has entered isolation mode. If the scanner is reset, the
sequence is repeated. Contact
Bluetooth Printer Setup
The Bluetooth managed device should be as close as possible, in direct line of sight,
with the Thor VM2 during the pairing process.
1. Open the Bluetooth EZPair Panel.
2. Tap Discover. Locate the Bluetooth printer in the Discovery panel.
3. Tap and hold the stylus (or double-tap) on the Bluetooth printer ID until the right-
4. Select Pair as Printer to pair the Thor VM2 with the Bluetooth managed printer.
The devices are paired. The Bluetooth managed printer may respond with a series of
beeps or LED flashes.
Please refer to the Bluetooth managed printer manufacturer's User Guide; it may be
available on the manufacturer's web site. Contact
product assistance.
Easy Pairing and Auto-Reconnect
The Bluetooth module can establish relationships with new devices after the user taps
the Discover button. It can auto-reconnect to devices previously known but which have
gone out of range and then returned within range.
See Reconnect.
Note: Configuration elements are persistent and stored in the registry.
Setup the Bluetooth module to establish how the user is notified by easy pairing and
auto-reconnect events.
AppLock, if installed, does not stop the end-user from using the Bluetooth application,
nor does it stop other Bluetooth-enabled devices from pairing with the Thor VM2 while
AppLock is in control.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
mouse-click menu appears.
Note:If there is no beep or no LED flash from the Bluetooth managed
printer, the Thor VM2 and the printer are currently paired.
Technical Assistance
Technical Assistance
Behavior
Disabled indication
for assistance.
for Bluetooth
183