Honeywell Thor VM2 User Manual page 287
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
4. Double-click the HSM Connect icon that was created on the PC desktop.
5. HSM Connect launches.
6. Click the OK button to dismiss the About CERDisp dialog box (either on the Thor
7. The Thor VM2 can now be configured from the HSM Connect window. Input from the
8. When the remote session is completed, terminate the HSM Connect program by
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
use HSM Connect. However, if a partnership is desired for other reasons, one may be
established now.
VM2 desktop or n the HSM Connect window on the PC desktop). The dialog box
automatically times out and disappears after approximately 20 seconds.
PC's mouse and keyboard are recognized as if they were attached to the Thor VM2.
selecting File > Exit or clicking on the X in the upper right hand corner to close the
application, then disconnect the ActiveSync cable.
275
Advertisement
Table of Contents
