Keyboard - Honeywell Thor VM2 User Manual

Keyboard

Start > Settings > Control Panel > Keyboard
Set keypad key map, keypad key repeat delay, and key repeat rate.
Factory Default Settings
Repeat character
Repeat Delay
Repeat Rate
1. If a USB keyboard has already been attached, remove the USB keyboard to program
2. Start the remapping utility.
3. Program the integrated programmable keys (i.e.: P1 - P7) on the Thor VM2.
4. Exit the remapping utility.
5. Attach the USB keyboard.
6. Restart the remapping utility.
7. Remap any keys desired on the USB keyboard.
If any modifications need to be made to the P1 - P7 keys at a later time, it is necessary to
remove any USB keyboard to edit these keys in the remapping utility.
8. :
218
the integrated keys.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Enable
Short
Slow