Honeywell Thor VM2 User Manual page 20

Software Setup
Hardware setup should be completed before starting software setup.
1. If prompted, perform touch screen Calibration.
2. Set
3. Set
4. Adjust
5. Pair
6. Set wireless client parameters using the
7. Set terminal emulation parameters.
8. Set AppLock parameter via the
9. Set DCWedge parameters via the
10.
11. Set
8
Date / Time.
Power Configuration Mode
Speaker Volume.
Bluetooth devices
Save Changes to the
Date / Time if not set during first boot.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
and Power
Summit Client
Administration
Data Collection
Registry.
scheme timers.
Utility.
control panel.
control panel.