Honeywell Thor VM2 User Manual page 193
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
•
Locate the bar code label, similar to the one shown above, attached to the Thor VM2.
The label is the Bluetooth address identifier for the Thor VM2.
The mobile Bluetooth scanner / imager requires this information before discovering,
pairing, connecting or disconnecting can occur.
Important: The Thor VM2 Bluetooth address identifier label should remain protected
from damage (rips, tears, spills, soiling, erasure, etc.) at all times. It may be required
when pairing, connecting, and disconnecting new Bluetooth bar code readers.
Thor VM2 with Label
If the Thor VM2 has a Bluetooth address bar code label attached, follow these steps:
1. Scan the Bluetooth address bar code label, attached to the Thor VM2, with the Blue-
2. If this is the first time the Bluetooth scanner has scanned the Thor VM2 Bluetooth
3. Open the
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Double-tap the stylus on the Bluetooth scanner. The right-mouse-click menu
6. Select Pair as Scanner to pair the Thor VM2 with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth bar code reader responds with a series of beeps
and an LED flashes. See
Note: After scanning the Thor VM2 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
Thor VM2 without Label
If the Thor VM2 Bluetooth address bar code label does not exist, follow these steps to
create a unique Bluetooth address bar code for the Thor VM2:
First, locate the Thor VM2 Bluetooth on the About tab of the
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
To open the EZPair program, tap Start > Settings > Control Panel > Bluetooth or tap
the Bluetooth icon on the desktop or tap the Bluetooth icon in the taskbar.
tooth mobile scanner.
label, the devices are paired. See
do not pair successfully, go to the next step.
Bluetooth
EZ Pair panel.
appears.
Bluetooth Beep and LED
Bluetooth Beep and LED
Indications. If the devices
Indications.
Bluetooth
control panel.
181
Advertisement
Table of Contents
