Honeywell Thor VM2 User Manual page 185

Stop Button
Tap Stop at any time to end the Discover and Query for Unique Identifier functions.
Devices not paired are not shown after any reboot sequence.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the Thor VM2
Bluetooth scanning range, the Bluetooth connection between the paired device and the
Thor VM2 is lost. There may be audible or visual signals as paired devices disconnect from
the Thor VM2.
Bluetooth Device List
The discovered paired devices may or may not be identified with an icon. Discovered
devices without an icon can be paired as a Scanner or a Printer. The Bluetooth panel
assigns an icon to the device name.
An icon with a red background indicates the device's Bluetooth connection is inactive.
An icon with a white background indicates the device is connected to the Thor VM2 and
the device's Bluetooth connection is active.
Double-tap a device in the list to open the device properties menu. The target device
does not need to be active.
Clear Button
Deletes all devices from the Device table that are not currently paired. A dialog box is
presented, "Delete all disconnected devices? Yes/No". Tap the Yes button to remove dis-
connected or deleted devices from the device table. The devices are removed from the
Device table after any reboot sequence or after closing and reopening the Bluetooth
panels. Tap the No button to make no changes. See Clear Pairing Table on Boot on the
Reconnect
Bluetooth Device Menu
Prerequisite: The Discover button has been clicked and there are Bluetooth devices
listed.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
tab.
173