Honeywell Thor VM2 User Manual page 305

Adapters
Note: Review the network settings configuration utilities and the default values before setting
All Adapters to Enable in the Adapters applet.
Manage Network
Settings
Manage Wireless
Settings
Current Adapter
Primary Adapter
Icon on taskbar
Use Avalanche
Network Profile
Avalanche Icon
(varies by Enabler
version)
Use Manual
Settings
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
When enabled, the Enabler will control the network settings. This parameter cannot
be configured from the Avalanche Mobility Center Console and is enabled by default.
When enabled, the Enabler will control the wireless settings. This parameter cannot
be configured from the Avalanche Mobility Center Console and is disabled by default.
For Summit clients, Manage Wireless Settings should not be checked as
configuration packages provide more radio configuration options.
Lists all network adapters currently installed on the Thor VM2.
Indicates if the Enabler is to attempt to configure the primary adapter (active only if
there are multiple network adapters).
Places the Avalanche icon in the Avalanche taskbar that may, optionally, override the
standard Windows taskbar.
The Enabler will apply all network settings sent to it by the Mobile Device Server.
Selecting the Avalanche Icon will access the Avalanche Network Profile tab which will
display current network settings.
When enabled, the Enabler will ignore any network or wireless settings coming from
the Avalanche MC Console and use only the network settings on the Thor VM2.
293