Eap-Fast - Honeywell Thor VM2 User Manual

To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for
encryption and complete other entries as detailed in this section.
See
To use Stored Credentials, click on the Credentials button. No entries are necessary for
Sign-On Credentials as the user will be prompted for the Username and Password when
connecting to the network.
1. Enter the Domain\Username (if the Domain is required), otherwise enter the User-
2. Enter the password.
3. Click OK then click the Commit button.
4. Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU

EAP-FAST

To use EAP-FAST, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set EAP Type to EAP-FAST
3. Set Encryption to WPA TKIP
4. Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for
encryption and complete other entries as detailed in this section.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Sign-On vs. Stored Credentials
name.
Main tab shows the device is associated after the radio connects to the network.
o
for information on entering credentials.
325