Honeywell Thor VM2 User Manual page 111
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
6. Provide mechanical support for the cable by securing it to the vehicle structure at
7. Connect the watertight connector end of the power cable to the Thor VM2 dock
8. Secure the power cable to the Thor VM2 using the
9.
10. If using the
11. Press the
12. Press the
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
cause the wiring insulation to deteriorate. Always route the cable so that it does not
interfere with safe operation and maintenance of the vehicle.
approximately one foot intervals, taking care not to over tighten and pinch
conductors or penetrate outer cable jacket.
power connector by aligning the connector pins to the power connector; push down
on the watertight connector and twist it to fasten securely.
Place Thor VM2 in the Dock
Screen Blanking
previously installed.
Power Switch
Power Button
feature, install the screen blanking box or switch if not
on the back of the Thor VM2 dock.
on the front of the Thor VM2 to turn on the Thor VM2.
Strain Relief Cable
Clamps.
99
Advertisement
Table of Contents
