3. Verify RMU.CE.CAB exists in the \System\RMU folder.
4. Double-click the Thor VM2 enabler CAB file in the \System folder.
5. The enabler automatically launches after installation and contacts the Mobile
eXpress Scan
If the Thor VM2 has an eXpress Scan icon on the desktop, eXpress Scan may be used for
the initial configuration of the device.
If the eXpress Scan icon is not present on the desktop, perform the Enabler Installation.
If the eXpress Scan icon is present, follow these steps to configure the Thor VM2 to con-
nect with the wireless network and the Mobile Device Server.
Step 1: Create Bar Codes
Bar codes are created with the eXpress Config utility on the desktop/laptop computer,
not the mobile device. Depending on the bar code length and the number of parameters
selected, eXpress Config generates one or more bar codes for device configuration. The
bar codes contain configuration parameters for the wireless client in the mobile device
and may also specify the address of the Mobile Device Server.
Bar codes should be printed at a minimum of 600 dpi.
Please see Using Wavelink Avalanche for details on creating bar codes.
Step 2: Scan Bar Codes
For each mobile device to be configured, please follow these instructions.
Start eXpress Scan on the Thor VM2 by double-clicking the eXpress Scan icon.
Enter the bar code password, if any.
Click Start.
296
Device Server. The Avalanche MC Console connected to that Mobile Device Server
identifies the remote device and performs a sync. This downloads any available
packages available for the Thor VM2.
eXpress Scan Desktop Icon
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide