7. Carefully lift the front panel away from the device.
8. Position the replacement front panel so wiring connector on the back of the front
9. Gently press the front panel into place.
10. Tighten the twelve (12) captive M3 screws. In the order shown in the top figure
11. Reinstall the Thor VM2 in the dock.
12. When the Thor VM2 is placed in the powered dock, the UPS battery automatically
13. Restart the Thor VM2.
14. The Thor VM2 is ready for use.
132
Wiring Connector
on Thor VM2
panel lines up with the connector on the Thor VM2.
above, use a #2 Phillips bit and torque the screws to 6-7 inch pounds.
reconnects.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Wiring Connector
on Front Panel