Replace Front Panel; Equipment Required; Replacement Procedure - Honeywell Thor VM2 User Manual

Replace Front Panel

Equipment Required

The following equipment is user-supplied:
•
•

Replacement Procedure

Caution: Before replacing the Thor VM2 front panel,
1. Place the Thor VM2 on a clean, well-lit sur-
2. Place the Thor VM2 in Suspend by pressing
3. Remove the Thor VM2 from the dock.
4.
5. Loosen the twelve (12) captive M3 screws
6.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Torquing tool capable of measuring inch pounds
#2 Phillips screwdriver bit
Battery.
face before performing the front panel
replacement.
the Power button.
Disconnect UPS Battery.
holding the front panel. Use a #2 Phillips bit.
Disconnect UPS
8
1
9
12
3
6
1 5 9
11
16
14
3 8 10
5
4
11
10
2
7
7 4
13
15
12
6 2
131