Vmxd Enhanced Dock - Honeywell Thor VM2 User Manual

VMXD Enhanced Dock

Caution: This dock is designed for DC power vehicle-mounted
SKUs
Power Connector
COM1Connector
COM2 Connector
CANBUS/AUDIO Connector
USB1 Connector
USB2 Connector
USB Host Connector
Ethernet
Power Switch
External Power Supply
Input Power
External Power Supply
352
applications only.
VMX004VMCRADLE
6-pin connector:
13.2VDC input power; requires DC power supply
Connector is also used for screen blanking via COM1 CTS and RTS signals
9-pin male, RS-232 serial port, COM1 with switchable power on pin 9
Do not use COM1 when screen blanking box is attached to avoid port conflicts.
9-pin male, RS-232 serial port, COM2 with switchable power on pin 9
15-pin male, CANbus/Audio connector supports either audio/microphone via adapter cable or
J1939 Female and J1939 Male connectors via CANbus cable
9-pin female, USB connector supports USB client port and USB host port via adapter cable
Note: USB Client port may not be supported by the Thor VM2 operating system.
15-pin female, USB connector supports two USB host ports via adapter cable
One USB Host connector behind waterproof cap
One RJ45 Ethernet connector behind waterproof cap
Note: An upgrade is necessary to support the Ethernet port on this dock. See
Enhanced Dock Support.
Sealed power switch
AC Adapter, 120-240VAC to 12VDC
DC Input Voltage: 13.2VDC,
Input Current: 4.6 Amps (typical),
Input Fuse: 8A Time Delay. Replace with same size, rating and type of fuse:
• Littelfuse 0215008.MXP
• Cooper Bussmann BK1/S506-8-R
• Bel Fuse 5HT 8-R
or equivalent.
50-150 VDC DC power supply required for all installations
Note: Use dock VMX005VMCRADLE (VMXD Enhanced Dock of Off-Vehicle Use) in AC power
applications.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Thor VM2 and