Profile - Honeywell Thor VM2 User Manual

Enter the Admin password (the default password is SUMMIT and is case sensitive) and
tap OK. If the password is incorrect, an error message is displayed.
The Administrator default password can be changed on the Global tab.
The end-user can:
•
•
•
•
•
•
•
After Admin Login, the end-user can also:
•
•
•

Profile

Start > Programs > Summit > Profile tab
Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel
is exited before tapping the Commit button, changes are not saved!
Factory Default Settings
Profile
SSID
Client Name
Power Save
Tx Power
Bit Rate
Radio Mode
Auth Type
EAP Type
304
Turn the radio on or off on the Main tab.
Select an active Profile on the Main tab.
View the current parameter settings for the profiles on the Profile tab.
View the global parameter settings on the Global tab.
View the current connection details on the Status tab.
View radio status, software versions and regulatory domain on the Main tab.
Access additional troubleshooting features on the Diags tab.
Create, edit, rename and delete profiles on the Profile tab.
Edit global parameters on the Global tab.
Enable/disable the Summit tray icon in the taskbar.
Default
Blank
Blank
CAM
Maximum
Auto
BGA rates full
Open
None
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide